Zebra Mobile Computer Accessories

Zebra EC50/EC55 Single Slot Charge & USB3.0 Cradle CRD-EC5X-1SCU-01 Supports device with/without trigger gun. Cradle Kit includes: power supply (PWR-BGA12V50W0WW) DC cable (CBL-DC-388A1-01) AC line cord (23844-00-00R)...

Standard Capacity Battery - 3060 mAh, PowerPrecision enabled Required Battery Door for Standard Capacity Battery (KT-EC5X-STDBTYD1-01), if converting from device with Extended Capacity Battery Extended Capacity Battery - 4180 mAh...

The Zebra EC50/55 Snap-On Trigger Handle (TRG-EC5X-SNP1-01) uses electrical trigger via contacts on back side of EC5X. Trigger Handle accessory offers customers the option of using the product in a gun form factor, ideal for scan-intensive situations...

RAM Twist Lock Suction Cup with Double Socket Arm and Diamond Base Adapter, overall Length: 6.75” can be attaches to back of Vehicle Cradles

Zebra TC58 Vehicle Holder The Zebra TC58 Vehicle Holder is designed to securely hold your TC58 mobile computer during vehicle installations. With spring tension for stability, it ensures the device stays in place even in rugged environments. The holder...

Zebra USB-C to 3.5mm Adapter Cable ADP-USBC-35MM1-01 allows headsets with 3.5mm jack to be connected to the TC21/TC26. Adapter provides PTT button, volume up/volume down buttons. Adapter cable length is about 2.5 ft. (78 cm). Clip on rear of adapter...

The Zebra Wrist Strap for Rugged Boot or Trigger Handle SG-PD40-WLD1-01. Can be attaches to the bottom of the Trigger Handle.

The Zebra TC53/58 Arm/Wrist Mount (Extended length Strap) SG-NGTC5-WMADP1-02 allows device to be worn as a wearable device. Wearable design allows the user to have easy access to the device while having the ability to use both hands.Swivel design allows...

Zebra TC21/TC26 In-Vehicle Holder holds TC21/TC26 in vehicle installations. Suction cup for easy installation and removal. USB-C port on bottom of device is accessible for charging. Does not support Snap-On accessories (Pistol Grip Trigger Handle)...

The Zebra TC21/TC26 Wearable Arm Mount SG-TC2Y-ARMNT-01 allow TC21/TC26 to be mounted to the arm for hands free operation. Mount allows TC21/TC26 to function as a hands-free solution in combination with the ring scanner. Mount covers the scan...

The Zebra TC21/26 4-Slot Spare Battery Charger can charges up to four spare batteries. Standard Capacity batteries will charge from 0-90% in less than 3 hours. Extended Capacity batteries will charge from 0-90% in less than 4 hours. Can be used...

The Zebra TC21, TC26 Connect Cradle (Workstation) CRD-TC2X-1SNWS-01 is an enhanced single-slot charging cradle allowing users to use the TC21/TC26 as a workstation or kiosk. Cradle includes the following additional ports: - HDMI - Ethernet - 4 USB ports...