Zebra Mobile Computer Accessories

The Zebra TC21/TC26 Soft Holster TC21/TC26 Soft Holster SG-TC2Y-HLSTR1-01 is Vertical orientation with Open Bucket design to accommodate hand strap for easy insertion and removal. non rotating for maximum durability. Opening at...

The Zebra Trigger Handle accessory TRG-TC2Y-SNP1-01 offers customers the option of using the product in a gun form factor, ideal for scan-intensive situations. It can be Easily attaches to TC21/TC26 top housing, easily removed to access...

Zebra Electrical handle for TC52ax (TRG-TC5X-ELEC1-02) uses electrical trigger via contacts on back side of TC52x/TC57x and TC52ax non-Healthcare models. Only compatible with TC52x/TC57x and TC52ax non-Healthcare models. Use Trigger Handle with...

Will charge TC5X only. Does not charge spare battery. Will charge battery in TC5X from 0- 90% in as little as 2.5 hours Compatible with TC5X units with hand strap, Rugged Boot, or Trigger Handle attached. Includes cradle insert/shim that requires...

Zebra EC50/EC55 Single Slot Charge & USB3.0 Cradle CRD-EC5X-1SCU-01 Supports device with/without trigger gun. Cradle Kit includes: power supply (PWR-BGA12V50W0WW) DC cable (CBL-DC-388A1-01) AC line cord (23844-00-00R)...

Standard Capacity Battery - 3060 mAh, PowerPrecision enabled Required Battery Door for Standard Capacity Battery (KT-EC5X-STDBTYD1-01), if converting from device with Extended Capacity Battery Extended Capacity Battery - 4180...

The Zebra EC50/55 Snap-On Trigger Handle (TRG-EC5X-SNP1-01) uses electrical trigger via contacts on back side of EC5X. Trigger Handle accessory offers customers the option of using the product in a gun form factor, ideal for scan-intensive situations...

The Zebra EC50/55 Snap-On Trigger Handle (TRG-EC5X-SNP1-01) uses electrical trigger via contacts on back side of EC5X. Trigger Handle accessory offers customers the option of using the product in a gun form factor, ideal for scan-intensive situations...

RAM Twist Lock Suction Cup with Double Socket Arm and Diamond Base Adapter, overall Length: 6.75” can be attaches to back of Vehicle Cradles

Zebra TC58 Vehicle Holder holds device in vehicle installations. Spring tension on holder. Provides access to USB-C port on bottom of device allowing device to be charged. Only works with devices with Rugged Boot attached. Does not support Pistol...

Zebra Over the ear headset (3.5mm) w/mic and PTT button w/clip. Rotating earpiece HDST-35MM-PTVP-02 for Push-To-Talk (PTT) applications. Compatible with Zebra PTT Express and PTT Pro. Uses 3.5mm rugged jack that is keyed/collared for a...

Zebra USB-C to 3.5mm Adapter Cable ADP-USBC-35MM1-01 allows headsets with 3.5mm jack to be connected to the TC21/TC26. Adapter provides PTT button, volume up/volume down buttons. Adapter cable length is about 2.5 ft. (78 cm). Clip on rear of adapter...