Zebra Mobile Computer Accessories

The Zebra Wrist Strap for Rugged Boot or Trigger Handle SG-PD40-WLD1-01. Can be attaches to the bottom of the Trigger Handle.

The Zebra TC53/TC58 Handstrap Single Pack (SG-NGTC5TC7-HDSTP-01) allows device to be easily held in palm of hand. Can be attached to device two ways: 1. Attaches directly to TC53/TC58 device. 2. Attaches to Rugged Boot/ Exoskeleton Includes loop...

The Zebra TC53/58 Arm/Wrist Mount (Extended length Strap) SG-NGTC5-WMADP1-02 allows device to be worn as a wearable device. Wearable design allows the user to have easy access to the device while having the ability to use both hands.Swivel design allows...

Zebra TC 21/26 Standard Capacity Spare Battery with PowerPrecision Ordering Option BTRY-TC2Y-1XMA1-01 - Standard Capacity Spare Battery with PowerPrecision (3300 mAh) BTRY-TC2Y-2XMA1-01 - Extended Capacity Spare Battery with...

Zebra TC21/TC26 In-Vehicle Holder holds TC21/TC26 in vehicle installations. Suction cup for easy installation and removal. USB-C port on bottom of device is accessible for charging. Does not support Snap-On accessories (Pistol Grip Trigger Handle)...

The Zebra TC21/TC26 Wearable Arm Mount SG-TC2Y-ARMNT-01 allow TC21/TC26 to be mounted to the arm for hands free operation. Mount allows TC21/TC26 to function as a hands-free solution in combination with the ring scanner. Mount covers the scan...

The Zebra TC21 / TC26 Protective Boot with Integrated Hand Strap increases drop spec of device to 5 ft. (1.5 m) includes boot top cap, boot bottom cap and integrated hand strap .Boot bottom cap must be removed when inserting device into cradles...

The Zebra TC21/26 4-Slot Spare Battery Charger can charges up to four spare batteries. Standard Capacity batteries will charge from 0-90% in less than 3 hours. Extended Capacity batteries will charge from 0-90% in less than 4 hours. Can be used...

The Zebra TC21, TC26 Connect Cradle (Workstation) CRD-TC2X-1SNWS-01 is an enhanced single-slot charging cradle allowing users to use the TC21/TC26 as a workstation or kiosk. Cradle includes the following additional ports: - HDMI - Ethernet - 4 USB ports...

The Zebra Zebra USB To Ethernet Module (MOD-MT2-EU1-01) Can be Attached to Single Slot USB/Charging Cradle (CRD-TC2Y-SE1ET-01) to provide Ethernet support. Mechanical switch selects between micro-USB B port and RJ45 Ethernet jack. 10/100/1000 Mbps...

The Zebra TC21/TC26 5-Slot Cradle Charge and communication cradle CRD-TC2Y-SE5ET-01 Can connects to USB-C connector and 2- pin charge contacts on bottom of TC21/TC26.It allows network speeds up to 1 Gb , can charge up to five TC21/TC26 units...

The Zebra TC21/TC26 5-Slot Charge only Cradle CRD-TC2Y-BS5CO-01 Can charge up to five TC21/TC26 units. It can charge Standard Capacity battery from 0 to 90% in less than 3 hours. Charges Extended Capacity battery from 0-90% in less than 4...