Zebra Mobile Computer Accessories

The Zebra TC22/27 Arm Mount (Velcro) SG-TC2L-ARMNT (SG-TC2L-ARMNT) enables the TC22/TC27 to be mounted to the arm for hands free operation. ►Mount allows TC22/TC27 to function as a hands-free solution in combination with the RS5100/RS6100 (or similar)...

Zebra TC22/TC27 Trigger Handle (TRG-TC2L-SNP1-01) Trigger Handle accessory offers customers the option of using the product in a gun form factor, ideal for scan-intensive situations. Easily removed to access battery Integrated 3-point stand for...

Zebra TC8300 Multi-Slot Cradle CRD-TC8X-5SCHG-01 can charge up to five TC8X devices. CRD-TC8X-5SETH-01: 5Slot Ethernet Cradle, charges up to five devices and provides Ethernet communication. CRD-TC8X-5SC4BC-01: 4Slot Charge Only Cradle with...

The Zebra TC8300 Zebra TC8300 USB/Charging ShareCradle  Kit (KT-TC8-01) can charge one TC8X device and one spare battery. ►NOT compatible with Snap-On accessories attached (e.g. audio cables, etc.…) Kit Includes: USB/Charging...

Zebra Electrical handle for TC52ax (TRG-TC5X-ELEC1-02) uses electrical trigger via contacts on back side of TC52x/TC57x and TC52ax non-Healthcare models. Only compatible with TC52x/TC57x and TC52ax non-Healthcare models. Use Trigger Handle with...

Will charge TC5X only. Does not charge spare battery. Will charge battery in TC5X from 0- 90% in as little as 2.5 hours Compatible with TC5X units with hand strap, Rugged Boot, or Trigger Handle attached. Includes cradle insert/shim that requires...

Zebra EC50/EC55 Single Slot Charge & USB3.0 Cradle CRD-EC5X-1SCU-01 Supports device with/without trigger gun. Cradle Kit includes: power supply (PWR-BGA12V50W0WW) DC cable (CBL-DC-388A1-01) AC line cord (23844-00-00R)...

Standard Capacity Battery - 3060 mAh, PowerPrecision enabled Required Battery Door for Standard Capacity Battery (KT-EC5X-STDBTYD1-01), if converting from device with Extended Capacity Battery Extended Capacity Battery - 4180 mAh...

The Zebra EC50/55 Snap-On Trigger Handle (TRG-EC5X-SNP1-01) uses electrical trigger via contacts on back side of EC5X. Trigger Handle accessory offers customers the option of using the product in a gun form factor, ideal for scan-intensive situations...

RAM Twist Lock Suction Cup with Double Socket Arm and Diamond Base Adapter, overall Length: 6.75” can be attaches to back of Vehicle Cradles

Zebra TC58 Vehicle Holder holds device in vehicle installations. Spring tension on holder. Provides access to USB-C port on bottom of device allowing device to be charged. Only works with devices with Rugged Boot attached. Does not support Pistol...

Zebra USB-C to 3.5mm Adapter Cable ADP-USBC-35MM1-01 allows headsets with 3.5mm jack to be connected to the TC21/TC26. Adapter provides PTT button, volume up/volume down buttons. Adapter cable length is about 2.5 ft. (78 cm). Clip on rear of adapter...