TECHNOLOGY SOLUTIONS LTD

TSL 3419 RAIN RFID Reader Module Developer Kit(3419-DEV-KIT-FCC-01)

Write a Review
SKU:
3419-DEV-KIT
Shipping:
Calculated at Checkout
  • TSL 3419 RAIN RFID Reader Module Developer Kit(3419-DEV-KIT-FCC-01)
  • TSL 3419 RAIN RFID Reader Module Developer Kit(3419-DEV-KIT-FCC-01)
  • TSL 3419 RAIN RFID Reader Module Developer Kit(3419-DEV-KIT-FCC-01)
  • TSL 3419 RAIN RFID Reader Module Developer Kit(3419-DEV-KIT-FCC-01)
  • TSL 3419 RAIN RFID Reader Module Developer Kit(3419-DEV-KIT-FCC-01)
$1,821.00

Description

The TSL 3419 RAIN RFID Reader Module Developer Kit (3419-DEV-KIT-FCC-01) aids developers in exploring and testing the capabilities of the 3417 RAIN RFID Modules. This module features a slim and compact form factor, offering various mounting options, and supports industry-standard USB and serial UART port interfaces. With cutting-edge technology and the latest anti-collision recognition algorithms, the TSL 3419 achieves impressive read rates of approximately 1300 tags per second. It incorporates the advanced Impinj E910 reader chip for optimal performance. The module offers a range of RF modes including High Speed Tag Acquisition Mode, High Sensitivity Mode, and Dense Reader Mode (DRM), ensuring excellent performance even in challenging environments.

 

Features & Benefits:

  • Provides connectors for Power, USB, High-Speed Serial and GPIO pins
  • Push buttons to start/stop commands stored in the memory banks
  • The Developer Kit can be set up in minutes.
  • The Developer Kit can be powered by DC (recommended) or USB (provided the USB-C data connection is capable of supplying up to 2A)
  • The only additional equipment required is a Windows 10 PC and some UHF RFID tags.

What's included?

  • RAIN RFID Development Board with TSL 3419 RAIN RFID Reader Module 
  • Antenna
  • Antenna Cable
  • Power Supply
  • USB-C and USB FTDI Cables
View AllClose

Additional Information

Dimensions:
42 (W) x 68 (L) x 6.7 (H) mm
Weight:
34 g (TBC)
Power Supply:
5 – 15V DC
Power Consumption:
1.2A (operating @ 30dBm, 5.0V DC)
Enclosure materials:
Aluminium
Mounting:
4x M2 pre-threaded holes
RFID Core:
Impinj E910
Standards supported:
EPC Class 1 Gen 2
RF Power:
1 – 31.5 dBm (1mW – 1.4W) Conducted Output Configurable in 0.1 dBm steps
Receive Sensitivity:
Up to -94 dBm
Antenna Interface:
4x MMCX 50 Ohm Mono-Static Ports
download data sheet:
https://rfid4ustore.com/content/data_sheet/3117-3417-3419-datasheet.pdf
View AllClose