How to connect Zebra RFD40 with TC22/ TC27/TC53 /TC58

Connecting your Zebra TC22/ TC27/TC53 /TC58 mobile computer to the Zebra RFD40 UHF RFID reader using the eConnex™ or Bluetooth adaptor streamlines your workflow, enhancing efficiency in data capture and inventory management. Here’s a detailed guide to help you with the connection process.

1. Hardware device requirement:

• Zebra TC22/ TC27/TC53 /TC58 Mobile Computer: Ensure it is fully charged and updated to the latest firmware.   

• Zebra RFD40 UHF RFID Reader: Ensure it is fully charged and ready for use.
• eConnex™ or Bluetooth adaptor: This adapter is designed specifically to facilitate the connection between the TC22/ TC27/TC53 /TC58 and RFD40.

2. Connect Using the eConnex™ or Bluetooth adaptor

• Align the Adapter: Position the eConnex™ or Bluetooth adaptor to align with the USB port on the TC22/ TC27/TC53 /TC58 and the connector on the RFD40.
• Attach the RFD40:

1. Connect the other end of the eConnex™ or Bluetooth adaptor to the RFD40 reader.

2. Fix the adapter through screws.

3. Ensure the connection is tight and the adapter clicks into place.

4. Then Attach the Zebra TC22/ TC27/TC53 /TC58 Mobile Computer to the RFD40.

3. How to remove the TC22/ TC27/TC53 /TC58 from the eConnex™ or Bluetooth adaptor:

• Hold the TC22/ TC27/TC53 /TC58 firmly with one hand.
• With the other hand, grasp the top part of the eConnex™ or Bluetooth adaptor.
• Gently but firmly pull the TC22/ TC27/TC53 /TC58 upwards and away from the adapter. Ensure you pull in a straight line to avoid damaging the connectors.

4. Power On the Devices

• Turn on the TC22/ TC27/TC53 /TC58: Press the power button on the TC22/ TC27/TC53 /TC58 to turn it on.
• Turn on the RFD40: Press the power button on the RFD40 reader to turn it on.

5. Configure the Software

• Open Zebra RFID Mobile Application: On the TC22/ TC27/TC53 /TC58, open the Zebra RFID Mobile application.
• Device Detection: The application should automatically detect the RFD40 reader. If not, navigate to the settings menu and manually select the RFD40 from the list of available devices.

6. Test the Connection

• Perform a Test Scan: Use the TagMatiks Wedge application to perform a test scan of RFID tags. Ensure the RFD40 reader is detecting tags and the data is being transmitted correctly to the TC22/ TC27/TC53 /TC58.
• Verify Functionality: Check that all functions of the RFD40 reader are operational through the TC22/ TC27/TC53 /TC58 interface.

7. Troubleshooting Tips

• Check Connections: Ensure all connections are secure. Reseat the adapter if necessary.
• Restart Devices: If the devices are not connecting, try restarting both the TC22/ TC27/TC53 /TC58 and RFD40 readers.

Firmware Updates: Ensure both devices have the latest firmware updates. Check Zebra’s support site for any available updates.