RFID Reader Accessories
RFID4USTORE ensures that you have all the accessories you need to operate your RFID hardware. RFID reader accessories come in a wide variety of form factors, such as: power supplies, adapter cables, docking stations, charging cradles, and more! We provide a wide variety of RFID reader accessories to make sure that you have everything you need to get your RFID project up and running in the most efficient manner possible. For help deciding which RFID reader accessories you need, please contact us!
-
TSL 1166 Docking Station Kit & Line Cord (US)
TECHNOLOGY SOLUTIONS LTD
$169.00The 1166 Docking Station Kit provides both device charging and a USB connection for data download. The Kit includes an 1166 Docking Station, 65W PSU and Mini USB lead. Also required: IEC Mains Cable (not supplied).$169.00 -
TSL 1128 Slide-on Pop-Loq Adapter
TECHNOLOGY SOLUTIONS LTD
$56.00This Slide-on Adapter for the 1128 Bluetooth® UHF RFID Reader allows the use of TSL’s Pop-Loq™ mounting system. Note that a device-specific Pop-Loq™ Mount needs to be purchased in addition.$56.00 -
Spare Battery for the 1166 UHF RFID Reader
TECHNOLOGY SOLUTIONS LTD
$94.00The TSL 1166 Rechargeable Lithium-Polymer battery. This battery is a separate accessory that can be used with the TSL 1166 Rugged Bluetooth UHF Reader and has the ability to be recharged and reused over and over again.$94.00 -
Single Slot Charge-Communication Share Cradle for RFD40 and TC22/TC27
ZEBRA TECHNOLOGIES
$296.00The Zebra Single Slot Charge Communication Share Cradle for RFD40 and TC22/TC27 can charge both RFD40 and TC22/TC27 Supports: RFD40 charging by itself. TC22/TC27 or HC20/HC50 charging by itself. Both RFD40 and TC22/TC27...$296.00 -
RFD90 Sled eConnex Adaptor for TC7X
ZEBRA TECHNOLOGIES
$137.00RFD90 Sled eConnex Adaptor allows TC70/70x/72/75/75x/77 to be mounted on top of RFD90 and communicate directly to the reader Adapter also allows both the RFD90 and TC70/70x/72/75/75x/77 to be docked as a pair in Single or Multi-Slot...$137.00 -
RFD90 Sled eConnex Adaptor for TC52ax
ZEBRA TECHNOLOGIES
$137.00RFD90 Sled eConnex Adaptor allows TC52ax with SE4720 scan engine to be mounted on top of RFD90 and communicate directly to the reader Adapter also allows both the RFD90 and TC52ax to be docked as a pair in Single or Multi-Slot ShareCradles Not...$137.00 -
RFD40 Spare/Replacement Battery (7000 mAh) with PowerPrecision Plus
ZEBRA TECHNOLOGIES
$140.00This is the standard battery that is included with each RFD40 unit. Provides 8 hours of continuous usage. Battery is same form factor as TC8X series devices, but is labeled differently for regulatory compliance. TC8X...$140.00 -
RFD40 Sled eConnex Adaptor for TC53/58
ZEBRA TECHNOLOGIES
$69.00RFD40 Sled eConnex Adaptor allows TC53/58 to be mounted on top of RFD40 and communicate directly to the reader. Requires TC53/58 configuration with 8-Pin Connector Back I/O connector. Adapter also allows both the...$69.00 -
Replacement Screws for Zebra RFD40/RFD90 Adapters
ZEBRA TECHNOLOGIES
$8.00Zebra RFD40/RFD90, Quantity of 4 Replacement Adaptor Screws Replacement Screws for Adapters Includes four screws which are included with each eConnex™ Adapter or Bluetooth Sled Adapter.$8.00 -
Replacement Blank Cover for eConnex™ Adapter Slot
ZEBRA TECHNOLOGIES
$16.00This is a spare/replacement cover that typically ships with each RFD40 unit. Cover snaps into place on RFD40 unit.$16.00 -
$55.00
-
Power Supply (WALIM0000005) for R4321P Quattro and R1290I Hex Reader
CAEN RFID
The WALIM0000005 power supply provides operating power for the R4321P Quattro and R1290I Hex Readers Ordering Options: WALIM0000005 - Power supply for the R4321P Quattro and R1290I Hex Readers