TagMatiks Pre-printed/Pre-encoded On Metal Blade II RFID Labels - 2.36" x 0.98" x 0.047"

The TagMatiks On Metal Blade II RFID Tag is ideal for use in asset tracking applications with TagMatiks AT or TagMatiks AT Lite software.

The TagMatiks On Metal Blade II RFID Tag is a printable on-metal label that is easy to program and works on just about any surface material you slap it on.

The tag is optimal for asset tagging, and is a small but powerful RFID label that can, in many cases, replace a hard RFID tag.

Other sizes available:

TagMatiks Pre-printed/Pre-encoded On Metal Labels- 1.8” x 0.31" x 0.06”

TagMatiks Pre-printed/Pre-encoded On Metal Labels- 1.8” x 0.7” x 0.06"

TagMatiks Pre-printed/Pre-encoded On Metal Labels- 2.36” x 0.24” x 0.04"

TagMatiks Pre-printed/Pre-encoded On Metal Labels- 3.9” x 1.6” x 0.06"

TagMatiks Pre-printed/Pre-encoded On Metal Labels- 2.75” x 0.71” x 0.06"

FAQs:

What is the TagMatiks on Metal Blade II RFID Tag?

The TagMatiks on Metal Blade II RFID Tag is a versatile printable RFID label designed for asset tracking applications, compatible with TagMatiks Asset Tracking (AT) and TagMatiks Asset Tracking Lite (AT Lite) software. This tag is optimized for use on metal surfaces.

What frequencies does the Blade II RFID Tag operate on?

This RFID tag operates at frequencies of 865 - 869 MHz (ETSI) and 902 - 928 MHz (FCC), allowing it to be used in various regions.

How is the Blade II RFID Tag attached to surfaces?

The Blade II RFID Tag is equipped with a high tack adhesive that provides excellent adhesion to all surfaces, including low surface energy plastics, ensuring secure attachment.

What are the typical applications for the Blade II RFID Tag?

The TagMatiks on Metal Blade II RFID Tag is ideal for asset tagging applications, making it suitable for use in various industries that require effective tracking of assets.

Can the Blade II RFID Tag be used on non-metal surfaces?

Yes, while the Blade II RFID Tag is specifically designed for use on metal surfaces, it can also be applied to non-metal surfaces due to its versatile adhesive.

Where is the best location to attach the TagMatiks on Metal Blade II RFID Tag?

Attach the tag directly to clean, flat metal surfaces using its adhesive backing. Avoid placing it near other metal objects that might block the signal.

Where is the best location to attach the TagMatiks on Metal Blade II RFID Tag?

Attach the tag directly to clean, flat metal surfaces using its adhesive backing. Avoid placing it near other metal objects that might block the signal.

What is the read range of the TagMatiks on Metal Blade II RFID Tag?

On metal: Up to 10 meters (33 feet)
On plastic: Up to 5 meters (16 feet)
Near liquids: Up to 4 meters (13 feet)