|
Description
|
Impinj Speedway RFID Antenna Hub
The Impinj Speedway RFID Antenna Hub supports 8 antennas per hub. The RFID Antenna Hub provides a low cost opportunity to create a large, contiguous RFID read zone... |
Impinj Speedway R220 RFID readers deliver the performance, quality, and reliability necessary for item visibility platform solutions. The Speedway R220 RFID readers is available with 2 monostatic... |
|
Other Details
|
- Frequency: 865 to 956 MHz
- Connector Type: RF Input: SMA Female 8 RF Outputs: SMA Female 1 Digital I/O: RJ45
- Cable Type: RF cable maximum length: depends on environment/region, typical 1/2 dB per meter signal loss, digital cable (Cat5) for control, maximum length: 300 ft (100 m) if shielded, 100 ft (30 m) if unshielded
- Mount: Two 1/4 in mounting holes
- Dimensions: 4 x 2.4 x 1 in (102 x 61 x 24 mm)
- Weight: 3.5 oz (100 g)
- Operating Temperatures: -40°C to +80°C (-40°F to +176°F)
- IP Rating: IP52
- Download Data Sheet: https://rfid4ustore.com/content/data_sheet/impinj-speedway-antenna-hub-en-us.pdf
|
- Air Protocol: GS1/EPCglobal UHF Gen2 (ISO 18000-6C) or RAIN RFID
- Frequency: 860 to 960 MHz
- Transmit Power: +10.0 to +31.5 dBm (PoE) (EU1 limited to +30 dBm), +10.0 to +32.5 dBm (Listed/Certified power supply) (EU1 limited to +31.5 dBm, JP2 limited to 30 dBm)
- Maximum Receive Sensitivity: -84 dBm
- Communications: 10/100BASE-T auto-negotiate (full/half) with auto-sensing MDI/MDX for auto-crossover (RJ-45),802.1x with PEAP/TLS and MD5 support, WPA for Wifi and Ethernet,3rd party Wifi adapters supported via USB interface, Speedway Connect (not included in Speedw
- GPIO: 4 inputs, optically isolated 3-30V, 4 outputs, optically isolated, 0-30V, non-isolated 5V, 100mA supply (DB-15)
- Power Supply: Listed/certified power supply, marked LPS or Class 2 with 24VDC output, rated minimum 2.5A, Power over Ethernet
- Antenna Ports: 2 monostatic antenna ports optimized for Impinj reader antennas (RP TNC connector)
- Dimensions: 7.5 in H x 6.9 in W x 1.2 in D (19 x 17.5 x 3 cm)
- Weight: 1.5 lbs (0.68 k)
- Operating Temperatures: -20°C to +50°C (-4°F to +122°F)
- Host API: Java or C#
- Demo Software: Speedway Connect
- Warranty: 1 year limited warranty with purchase, option to extend
- Environmental Sealing: IEC IP52
- Download Manual: https://rfid4ustore.com/content/data_sheet/Speedway%20Reader%20Datasheet%20Software%20Tools%20Accessories%20and%20Specifications%2020210716.pdf
- Download Data Sheet: https://rfid4ustore.com/content/data_sheet/Speedway%20Reader%20Datasheet%20Software%20Tools%20Accessories%20and%20Specifications%2020210716.pdf
|
